Print

MODEL CODING

5

OM015 15mm ( 1/2" )
OM025 25mm ( 1" )
OM040 40mm ( 11/2" )
OM050 50mm ( 2" )
Body material  
A Aluminium
S 316 Stainless Steel
H High pressure stainless
Rotor material  
4 Aluminium
5 Stainless steel
9 Application specific
Bearing type  
1 Ceramic( SS rotors )
4 Hardened steel roller bearings( Alum. rotors )
O-ring material  
1 Viton ( standard ) -15~+200ºC [ -5~+400ºF ]
2 Ethylene Propylene Rubber-150ºC (300ºF) max.
3 Teflon encapsulated viton-150ºC (300ºF) max.
4 Buna-N (Nitrile) -65~+100ºC (-53~+212ºF
Temperature limits  
2 120ºC( 250ºF ) -see note 1
5 120ºC( 250ºF ) -see note 2
Process Connections  
1 BSP female threaded
2 NPT female threaded
4 ANSI-150 RF flanges
5 ANSI-300 RF flanges
6 PN16 DIN flanges
9 Customer nominated
Cable entries  
Code O with mechanical register options
0 3~6mm cable gland( B2/B3 options)
1 M20 x 1.5mm
2 1/2" NPT
Model No. Example  
OM025 A-4-1- 5-1-1-R-2
2 NPN open collector phased outputs  
IECEX & ATEX approved  
IECEX & ATEX approved  
accum. & reset totals, pulse output  
IECEX & ATEX approved  
IECEX & ATEX approved  
flow rate, totals & all outputs  
IECEX & ATEX approved  
dc 2 stage batch controller  
M* M1litres, M2gallons
M* M3litres, M4gallons
consult factory  
Integral options  
QP Quadrature pulse output
E1 Explosion proof ~ Exd
Q1 Exd with Quadrature pulse
B2 BT11 dual totaliser
B3 Intrinsically safe BT11 (I.S.)
R2 RT12 Flow Rate Totaliser
R3 Intrinsically safe RT12 (I.S.)
E0 EB10 batch controller
M* 3 digit mechanical reset totaliser
M* 4 digit mechanical reset totaliser
SB Specific build requirement

(1) 120ºC (250ºF) rating of the pulse meter, 80ºC (180ºF) rating with BT, RT & EB options.
See temperature code 5 for higher temperature with BT, RT, & EB
(2) Cooling fin is fitted with integral instruments for operation between 80~120ºC (180~250ºF)

RECOMENDED STRAINERS ( air eliminators available )

ST015S1 15mm ( 1/2" ) - 316SS
ST025S1 25mm ( 1" ) - 316SS
ST040S1 40mm ( 11/2" ) - 316SS
ST050S1 50mm ( 2" ) - 316SS

 

6

ACCURANCY & PRESSURE DROP

 8

DIMENSIONS

 F

 

 

 

PO Box 1750 Bairnsdale VIC 3875 Australia                          In the interest of product development, the design & specifications may alter without notification 
Tel. +61 3 5157 8309 Fax. +61 3 5157 8332                 
e-mail : This email address is being protected from spambots. You need JavaScript enabled to view it.                                                                                                                                                                               
www.banksiacontrols.com.au                                                                                                                       Data sheet No. DSOMSML-0307

                                                                                                                                                                                                                                                                                                                                                                                                                   9

...
Click here - fbetting view betfair bonus